Sensor Control System for LED Luminaires
An integrated sensor option is available for the Metalux Encounter and SkyRidge LED luminaire families. This luminaire-integrated sensor control system is optimized for code-compliant occupancy detection and daylight harvesting. The remote allows changes from the default settings for occupancy, target light level, preset lighting levels, and more. Factory wired to the luminaire, the sensor switches on or off based on occupancy and dims the light when enough daylight is available. With a single product to mount and a single electrical connection to make, customers save money on the total installed cost when occupancy and daylight harvesting controls are needed.
The EYE Aphos Mini Series is suitable for applications needing bright, white light including parking garages, canopies, warehouses, facades and similar settings. The 39W LED Luminaires deliver 3,000 lumens in Type II, IIA, III and V configurations. It has IP65 rated optics, and an IP67 rated driver for protection against water, insects and dirt. Customers may select either 4,000K or ,5000K color temperatures, with 70 CRI. Five different powder-coat color finishes are available.
LED Canopy Light
VANLED comes in six power packages (10W, 20W, 40W, 52W, 65W and 75W) and replaces 50W to 200W HID fixtures. It has an efficacy rating of 122 lm/W and reduces energy costs by over 80%. Plus, its low-profile design provides a clean contemporary look that makes it ideal for a wide range of applications including those with vehicle height restrictions. VANLED is DesignLights Consortium (DLC) approved and eligible for utility rebates that often reduce the payback period to as little as one or two years. The fixture is built to last with a vandal resistant and UV resistant polycarbonate lens that won’t discolor when exposed to direct sunlight. VANLED models are UL-listed for wet locations and are protected from dust, insects and water intrusion with an IP66 rating.
Fulham recently introduced a new line of DALI and 0-10V programmable LED drivers and a new LED driver/emergency battery pack combo product. ThoroLED Programmable LEDs have a hand-held programmer that can set different current outputs for the drivers being used in luminaires either stand-alone or connected to a computer. The new HotSpot “All-In-One” LED Driver/Emergency Battery Pack provides an easy-to-install solution for LED luminaire manufacturers that need stand-by battery back-up in case of power interruption while lowering the total installed cost, by simplifying installation and wiring.
LED Area Lighting
Spaulding Lighting’s Cimarron outdoor lighting luminaire is integrated with an Ethernet controlled LED fixture, 360º hemispheric camera and communications platform. The Active Deterrence transforms the solution from passive to active, with the ability to flash lights and broadcast audible messages or alerts when occupancy is detected. Available as a stand-alone solution or as part of an existing surveillance infrastructure, the system can be implemented quickly.
Spaulding Lighting/ Hubbell Lighting
LED Retrofit Kits
LEDtronics’ UL-listed LED Universal Retrofit Kits feature a screw-in retrofit unit for installation into just about any existing lighting fixture. This line of LED Retrofit Kits directly replace 80W all the way up to 1,500W HPS and metal-halide lamps while using only 35W to 450W—a reduction of energy consumption of up to 70 percent.
Lighting Control System
The PowPak wireless fixture control is designed to make it easy to add individual fixture control to buildings in just minutes without the need for additional wiring or any sophisticated tools or software for programming. The latest addition to the Lutron Energi TriPak family of control systems, PowPak wireless fixture control allows users to transform any fixture into an intelligent and energy-saving luminaire by providing it with wireless dimming, occupancy sensing and daylight harvesting capabilities that work right out of the box. By providing a fixture-by-fixture control solution and eliminating the control wiring between fixtures, it also dramatically reduces the design challenges, installation costs and risk associated with adding energy-saving lighting controls to existing buildings.
Adjustable LED Downlight
A new 5-inch aperture adjustable LED downlight is now available from Nora Lighting. The latest addition to Nora’s Diamond II Retrofit Series of LED recessed fixtures, the 5-inch model is cULus listed for use in existing IC or non-IC housing from Nora and others. The luminaire features a 10.55W LED module producing 650 lumens with 90+ CRI for more realistic color rendition. An adjustable gimbal rotates 356° and adjusts from 0 to 40°. Designed for commercial and residential applications, the 5-inch downlight is suitable for wall washing effects, along with accent lighting and sloped ceiling applications.
Prescolite’s high-output LED downlight is now offered in lumen packages ranging up to more than 16,000 lumens. From school auditoriums and concert halls to theaters and churches, the MegaLum delivers cost savings and performance for high ceiling applications from 20 to 60 feet. Available in either a downlight (MD8LED) or cylinder (MC10LED) option, the MegaLum is capable of delivering over 16,000 lumens and up to 100 LPW and offers a variety of dimming options including DMX. Prescolite/Hubbell Lighting
LED Track Luminaire
WAC Lighting’s Paloma Adjustable Beam LED Track Luminaire received the 2015 Lightfair International’s Innovative Product of the Year in the Track, Display, Undercabinet and Shelf category. An track lighting solution designed for challenging applications, Paloma is a museum-quality LED luminaire that features a beam angle that can be adjusted by hand as necessary. The unique knob conveniently located on the back of the track head allows the user to adjust the beam angle from 15º to 60º with ease and as often as necessary within their application. This die-cast aluminum track head is designed for use on WAC Lighting’s W Track systems, both 120V and 277V.