Retrofit LED Downlights that Rotate
MaxLite Warm-on-Dim Retrofits are built with an adjustable lens that rotates 350 degrees and tilts vertically up to 30 degrees to create custom directional lighting for wall art, sculptures, product displays and surface tops, such as counters or tables. They may also be used to illuminate damp locations such as bathrooms, spas and covered patios. Designed to fit standard five- and six-inch recessed housings, MaxLite Warm-on-Dim Retrofits offer a long life of 35,000 hours and come backed by a five-year limited warranty and lifetime product support.
Motion Sensing LED Closet Luminaire
EPCO’s new LED Closet Luminaire is designed for smaller indoor residential locations such as attics, basements, garages and storage buildings. The fixture features three operating modes: standard wall switch, ON/OFF for the luminaire itself and occupancy mode. It detects motion up to 15 feet away, continues to operate until no motion is detected for three minutes, and then shuts-off. For simplicity, no separate line voltage is needed for a wall switch saving the electrical contractor between $25 and $40 per installation. It provides significant energy savings with an annual operating cost of $.28 cents per year based on a total of 60 minutes per day, 265 days per year at $.11 KWH, complying with mandated energy code requirements.
Commercial LED Downlight
The INNOFIT Series is commercial downlight features adjustable lumen output for three distinct lumen levels equivalent to various CFL combinations. Users simply adjust the lamp power to the desired lumen output by sliding the selector switch on top of the fixture. The adjustable housing clips allow for installation in a large range of commercial and architectural housings ranging from 6-inches to 7.4-inches. These spring-action clips are designed to push up easily and fit securely for both retrofit and new construction installations.
LED Retrofit Kit
Formerly backed by a five-year product warranty, the Everline LED Retrofit Kit will now offer a seven-year limited warranty. The kit simplifies the transition from fluorescent to LED, reducing electrical demand and energy consumption compared to conventional fluorescent lighting systems. Available in two- or four-foot kits, the product consists of either two or three LED-lensed modules, one LED driver and a harness packaged together with replacement instructions. The kits are DesignLights Consortium (DLC) listed and have a 140,000 hour rating at L70, reducing maintenance costs.
Recessed LED Lighting Fixtures
The ML1, ML2 LED Modulinear Luminaires joined JESCO’s family of aimable, dimmable recessed ceiling fixtures, with one to four LED modules. ML1 incorporates a single 22.5W high output three-step MacAdam COB (Chip-on-board) LED; ML2 (pictured here) has a single 15W COB. Both models offer a range of narrow, medium and wide beam angles.
Both ML1 and ML2 are designed for lighting or showcasing merchandise showrooms, freestanding merchandise floor displays; wall shelves, clothing racks and mannequins; accent/ambient or spot lighting in museums and galleries; hospitality and dining venues; building entryways, lobbies, waiting rooms, corridors; and other commercial, institutional or upscale residential interiors.
LED Troffer Retrofits
Like the other products in the Litetronics Retrofit Kit family, these new retrofit kits feature powerful rare earth magnets that enable simple hands-free installation of LED technology in under three minutes. Their high-quality design fits neatly inside the luminaire, preserving the optical output and aesthetics of the previous fixtures and eliminating the need to break into the ceiling plenum. The products’ 85,000-hour life delivering up to 20 years of maintenance-free operation. They are additionally Design Lights Consortium (DLC)-listed for rebate by utilities nationwide.
The LED MiniPack provides mid-range directional lighting in a long-lasting architecturally-styled fixture. Made with durable heavy-duty cast aluminum, these flush-mount wallpacks are available in a wedge (7 inches x 7 inches) or round shape (8.5 inches diameter). The LED array enables the fixture to deliver as much as 874 lumens while consuming only 12W. They can be purchased with optional photocell and/or surge protection. Perfect for doorways, walkways, breezeways, corridors, wall or column mount applications.
Low-Bay and High-Bay LED Fixtures
Shat-R-Shield’s first LED Low Bay & 2nd Generation LED High Bay fixtures have separate heat sinks for the driver (patent-pending on these heat fins) and LEDs to maximize thermal management of the electronics. The Low Bay is a direct retrofit for 175W metal halides and the High Bay is a direct retrofit for 400W metal-halide or six lamp T5 fixtures. Highly efficient at 90+ LPW, both the Low and High Bay have that traditional look and design so there’s no worry of disturbing the look and feel of the facility.
LED Fixtures for Retail and Hospitality Market
The Xd30, Xd24 and Xd20 chip-on-board (COB) LED trackheads deliver the single-glow-optic aesthetics demanded for high-end retail shops, restaurants and hospitality users. They are available in 2,700K, 3,000K, 3,500K and 4000K color temperatures, the fixtures offer field-adjustable beam spreads of 15 degrees, 25 degrees and 40 degrees.
Designed with a low profile and shallow installation depth for delivering task lighting from tight spaces, WAC Lighting’s new LED90 Edge Lit Button Lights are designed to be surface mounted or recessed. The versatile LED luminaires feature a built-in look within shelves, under and inside cabinets, curios and displays in fine residential, retail, office and hospitality environments. Each ultra-thin, one-half inch thin luminaire uses just five watts and operates on 24-volt systems. They are available in 2,700K and 3,000K color temperatures, have a high 90 CRI and 100,000-hour rated life.