Solar-Powered LED Outdoor Fixtures
SEPCO’s SolarViper solar-powered, pole-mounted LED area, parking lot, roadway and walkway provide crisp white light where needed at motorist and pedestrian levels, without dependence on any electrical-utility grid system. The lighting fixture is 100% solar powered at all times, off the grid, self-storing and self-recharging. It replaces up to 1,000W metal-halide or high-pressure sodium lights and any multi-unit linear fluorescents or CFLs in the same outdoor area, parking, road or walkway applications.
Solar Electric Power Co. (SEPCO)
LED Replacement for 100W Incandescents
MaxLite’s 17W Omnidirectional LED A21 lamp replaces a 100W incandescent bulb and yields more than 80% savings in energy throughout its L70-rated lifetime of 25,000 hours. Strictly matched for color quality and consistency, the lamp is available in 2,700K, 3,000K and 4,100K correlated color temperatures (CCTs) and delivers up to 1,600 lumens with an efficacy up to 94. It offers a 300-degree beam angle that produces even, consistent light in all directions. The A-line lamp is dimmable down to 10% on a wide variety of dimming control systems and is available in a standard medium base, which enables convenient screw-in as well as GU24-base installation into existing chandeliers, pendants, wall sconces and table/floor lamps that are used for both residential and commercial applications.
LED Retrofit Downlights
The E Series LED recessed modules from Lithonia Lighting/Acuity Brands are available in multiple color temperatures and two sizes compatible with most manufacturer housings -- a 4-inch module and a combination 5-inch and 6-inch module. The module does not require any lamps and is designed to be virtually maintenance free. Dimming capabilities include instant-on and CentertoEdgeTM, as well as line voltage dimming to 10% with a patent-pending zero inrush driver. The E Series LED is wet-location listed for use in any indoor and outdoor application.
Lithonia Lighting/Acuity Brands
LEDs Replace Halogen MR16 Lamps
The Civilight MR16 family is designed to replace halogen MR16s for accent and ambient lighting in display cases, cabinets, recessed and track lighting applications. Included in this family is the dimmable Architectural 10W MR16 in a GU5.3 base that delivers up to 520 lumens and a high 95 color rendering index (CRI) with an R9 value of 80. Designed around Civilight’s patented HALED design, the lamps replicate traditional MR16s in both look and light distribution. Five other models, in 7W, 8W and 9.5W versions, are offered in GU5.3 and GU10 bases in 2,700K, 3,000K and 4,000K CCTs and deliver up to a 95 CRI and 500 lumens.
Commercial-Grade LED Downlight
Built to fit a standard 4x4 J-Box, Prescolite’s LBSLEDA is an alternative to recessed products in settings where plenum height is challenging or where fire codes restrict the use of recessed fixtures. The fixture is designed for commercial, new construction, remodel, and residential applications and features an intuitive snap-in system to simplify flush-mount installation. Users only need to install the snap-in adapter, connect wires and then snap the fixture into place with the flush-mount clip. The fixture also includes an E26 Edison Base adaptor for a retrofit screw-in option.
LED Lanterns/Flood Lights
Milwaukee’s M12 and M18 LED Lantern/Flood Lights are equipped with TRUEVIEW High Definition to deliver a consistent beam and a true representation of colors and detail, leading to a more productive work area. The 2362 and 2363 also deliver light output with over 400 and 700 Lumens, respectively. On a single charge, the new lights can illuminate an area for up to 75 hours on low and up to nine hours on high. A rugged design and impact resistant lens allow the new lights to withstand abusive jobsite conditions, and both models offer a lifetime warranty on the LEDs. As an added value to the user, each light also includes a high power 2.1A USB port to charge tablets, smart phones, mp3 players and other electronic devices. They are powered by Milwaukee RED LITHIUM batteries.
LED Recessed Downlight
JESCO Lighting's RLR-5612-JB incorporates its own integral shallow junction box with a driverless AC LED module, allowing units to operate directly from ordinary AC line voltage. The fixture is specifically designed for use wherever high-performance, very long-life ambient/accent interior lighting is sought for effective, energy-saving recessed-ceiling solutions. The RLR-5612-JB does not require a separate recessed ceiling housing. Standard 120V input wires simply connect into the integral junction box — simplifying the installation process, while significantly reducing installation costs. No special tools are required. Fixtures can be “daisy-chained,” allowing a single feed to power multiple light sources and fixtures.
Flexible LED Lighting System
Xen-Flexible LED is a flexible low-profile, low-voltage LED lighting system for commercial and residential interiors. The UL-listed LED offers continuous single-length runs up to 165 feet of curvable, bendable, even illumination. Choice of four LED spacings from 2.25 to six inches; watts per linear foot from 3.6 up to 9.74; and lumens per foot from 216 to 584. With a CRI of 82+ Xen-Flexible LED lamps are replaceable, and can be retrofitted in existing magnetic 24V Xenflex installations. Xen-Flexible is designed for cabinets, coves, displays and under counters.
LED Downlights with 4-Inch Square Trim
Nora Lighting now offers 4-inch die-cast aluminum square trims for its popular LED Diamond II 90+ Retrofit Series. The new trims are designed for use with standard round housings and are available in three square flange styles with sharp edges for a contemporary appearance. The Series includes a square flange with round reflector; a square flange with square 2-inch pinhole; and a square flange with square 2.75-inch regressed opening. Nora’s round housings with square trims allow easier orientation adjustments. Diamond II 90+ fixtures include Cree integrated LED modules with 650 to 750 lumens and 92 CRI and high R9 values. Color temperatures include 2,700K, 3,000K and 4,000K. All models are cULus wet label listed and CA Title 24 compliant.
LED Pendants and Sconces
The Canoe LED Pendant and Sconce Collection from Winona Lighting comes in three styles: vertical wall mount, horizontal wall mount and horizontal pendant. Luminaires range from 30 to 54 inches in length depending on mount application. Designed for applications in indoor commercial, residential, hospitality and retail space, the fixture has a solid aluminum housing is available in five standard finishes and color temperatures that include 3,000K, 3,500K and 4,000K with 2,100 or 4,100 lumen output options.
Winona Lighting/Acuity Brands