The CM94 2000-amp AC/DC electrical utility clamp meter is designed to tackle high current electrical measurements in utility and industrial job sites. It features an oversized jaw to easily manage larger conductors and busbars. With CAT IV-1000V overvoltage protection, it works on relays, distribution panels, vaults and more. The meter features a 55-mm jaw; true-RMS (root mean square) technology to measure alternating voltage or current; continuity test mode; low impedance mode to clear ghost voltages; and a diode test and resistance. A variable frequency drives (VFD) mode allows the meter to avoid noisy signals. The product is drop-tested to withstand a 2-m drop and can perform frequency and temperature measurements.
The CerroPack is a specialized THHN material handling packaging system designed for mid-length wire pulls, delivering from 750 to 1,500 ft of 12- or 14-gauge THHN with improved SLiPWire Technology. Weighing less than 30 lbs, its special packaging also includes technology to better ensure tangle-free wire pulls, and the interlocking snap-and-pull design allows the end user to configure the packs as needed to pull the circuit all at once. Other features include a remaining footage estimator and a clear plastic pack to keep wire clean and protected.
Fishing Reel Case and Cartridges
The Reel-X line of free-spinning reels are designed to reduce tape friction and eliminate binding. The case is designed with no handle, encouraging the user to hold the case closer to their body to use less energy while fishing. Additional case features include a primary exit for ambidextrous use of the case at various orientations or angles; storage lock; textured grip for better hold; and a secondary exit. The case is designed to be opened easily to both remove dirt and quickly swap-out cartridges.
The German-made DoubleJoint control cabinet keys are designed for various systems, including control panels, shut-off valves, shut-off systems and more. It features eight sizes of three profiles – outside square, triangle and double-bit – and is made of zinc die-cast with a plastic, fiberglass-reinforced body. Magnets allow the keys to fold and unfold, and a compact size allows users to carry the tool in a pocket while a foldable design allows the key to be used in a right-angle or opened to 180° for access in tight areas
This line of wireless structured media centers and accessories are designed to be a distribution location for wireless and cabled networks. The enclosures, doors and covers are designed and manufactured to permit the full reach of wireless signals and diminish the effect of interference. ABS polymer enclosures come in three sizes – 14, 28 and 42 in. – and are compatible with Leviton’s full line of connected home products. Additional features include faster installation that can save up to $1,400 per 100 units; ratcheting hinge and latch system; vented hinged doors with tri-plane heat dissipation; doors that allow a 180° swing; a multi-bay attachment tube accessory; stacked bulk packs of enclosures for large-scale projects; and a range of accessories.
Orbit Industries is introducing two new additions to its simple support bracket system: the universal mounting adapter with back support and the simple support bracket for true 5-in. boxes. The former accepts any 4-in., 4 11/16-in. and 5-in. square boxes. It is used to mount the box directly to a stud wall face. Rings can be mounted independently of the box, including adjustable-depth rings. It provides 2.5-in. to 3.5-in. back support. The simple support bracket for true 5-in. boxes expands from 15 in. to 25 in. and can adapt to any stud spacing in a wall or ceiling. The new products can be purchased as part of a complete assembly set, including both support bracket systems and a pre-installed 5-in. square box.
Panduit partnered with Epson to develop a line of handheld printers designed for the industrial, construction and network infrastructure industries. The first models in the line, the MP100 and MP300, have a print speed of 1.4 in./sec, a range of die-cut and continuous label sizes and materials, USB connectivity, direct printing from Easy-Mark Plus software and integrated automatic cutter with full- and half-cutting. They can also accommodate label media up to 1.5-in. wide.
Screw Terminal Hardware
These sample kits include a selection of screw terminal hardware designed for high-current terminations on printed circuit boards and include both through-hole and surface mount models as straight and right-angle connectors. This range of screw terminals have 25A to 150A ratings for through-hole terminals and 10A to 85A ratings for surface mount hardware. Eight different styles provide various pin configurations for PBC mountings. M3, M4, M5, M6 and M8 screws are available.
The line of laser markable labels from Brady is designed for PCB board manufacturing and maintains high-resolution at small font sizes with the ability to withstand harsh conditions. These labels, which come with an anti-static option, produce little or no debris during the engraving process and come in color options of black on white and white on black.
These single or dual loop detectors are available in either plug-in or DIN rail mount housings, and they accept universal supply voltages. Equipped with automatic loop frequency tuning and sensitivity tuning, additional product features include an automatic sensitivity boost (ASB); 20 µH to 1000 µH; multicolor diagnostics LEDs; fail safe and fail secure functions; two SPDT relay outputs; selectable output operation (pulse or presence); power supply range of 24-240 VAC/DC; sensitivity adjustment of 0.01% to 1%; automatic or manual loop frequency tuning; and loop diagnostics capabilities to detect loop short/open circuit, inductance out of range and channel cross talk.